Precision Chambering

Precision Chambering

Action Concentricity starts with every cut on the action being true and concentric to the rifles bore and chamber. We start with mounting the action in the lathe, by running the mandrel in the bolt raceway absolutely true to the axis of the spindle. After the action is running true the truing process starts. All cuts are then made to your action with it running true to the bolt raceway and concentric.

Action/ Bolt Truing

Action/Bolt Truing

The Action of a bolt action rifle is the heart of any rifle. Concentricity starts with every cut on the action being true and concentric to the rifles bore and chamber. We first start with mounting the action in the lathe. By running the mandrel in the bolt raceway absolutely true to the axis of the spindle. After the action is running true the truing process starts. All the cuts that are made to your action are made with it running true to the bolt raceway.

Muzzle threading

Muzzle Threading

All muzzle threading is done by first truing the muzzle to the bore of the barrel just as we did when chambering. To insure the most accurate threads and shoulder possible.

 

 

 

Muzzle Break & Install

HARRELL’S Precision Muzzle Breaks

Harrell’s Precision muzzle breaks are single point tool threaded on a CNC lathe
to insure the threads are square with the end and bore. (They are never
tapped) We offer a brake to fit any barrel from .550 with 7/16 threads
to 1.5 inch with 1-inch threads. Breaks come in both – Tactical and

Spiral Port, Tuner breaks offered also!!!!

Break/Tuner is installed on muzzle then bored out to be true too the rifle bore to
insure the most accurate break and most effective break.

Load Development

Load Development

New Rifle Brake-In (ammo included)
Load Development & Verification at long range (500 yards)
50 Rounds of Custom Ammo With Ammo Box

**This service will be provided only for a new rifle built by H&W with the purchase of an optic or supplied optic.**

Custom DIes

Custom PTG Sizing Dies

Custom Full length dies for Complete Rifle builds by H&W can be cut with the same reamer and then heat treated and TiN coated. This gives the ability to size cartridges that match fit the rifles chamber.